Commodore’s SX-64 was an ahead-of-its-time, transportable colour pc based around the center technology from the legendary Commodore 64 (publication ). Regrettably, the SX-64’s external keyboard is notoriously failure prone. In reality, of those 2 keyboards I’ve got, one is completely dead and you barely registers a key media (and in fact recently appears to have stuck key signals, therefore it’s even worse). Regrettably, replacing keyboards are incredibly tough to find and often entails purchasing another complete system, which, if you’ve shopped for SX-64’s of overdue, you know is not affordable. Fortunately, I did find one solution to many an SX-64 owner’s problem, and that’s a offering from Jim Brain at Retro Innovations. Retro Innovations AdapterHow that the SX-64 is likely to appear. Even though the choices are a bit perplexing, if you move here, you can decide on the SX64 to/from PC option. My selected arrangement was as follows: (Configuration: SX64 to/from PC, Joyport Sockets: No, Assembled? Yes). After about a month, I obtained my assembled board, which was ready-to-go. The plan is straightforward enough. You simply take your SX-64 keyboard , plug that into the SX-64 as normal, then plug the other end into the slot on this device. You then review azpen a746 7 inch quad core 8gb android tablet – armchair arcade plug a PS/2 compatible keyboard using a Mini-DIN6 plug into the PS/2 port on your device. At least that’s the theory. Regrettably, it appears that the standard SX-64 cable does not fit into the connector on the board (I tried both of mine), that I supported with Jim Brain via email (I need he’d made this known on the site or perhaps in our previous email addresses ). Though he suggested only using a normal DB25 cable (that it ends up is advocated on his other website ), all my DB25’s did not fit . My only option was to snip the plastic away on the SX-64 computer cable connector end, which you can see in the photo. Ugly snipping, but it now fits. As you can also see in the photograph, my snipping handiwork along with my Xuron 170-II Micro-Shear Flush Cutters was not great (I had to be particularly attentive not to snip any hooks! ) , however it gave me an excuse to order some files to fix this up later (they ought to also be helpful for helping to beautify a modification that I made into the removable lid onto a few of my Coleco Adams). How Everything joins